Filter
Top Products
ENGLISH
5
CONNECTION/PREPARATION
__________
Connecting the antenna and the mains cable
1 Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-
na socket on the television.
2 Plug the mains cable supplied into the »AC IN« mains socket of the tele-
vision.
3 Plug the mains cable into the wall socket.
Notes:
Do not plug in the power cord of your device until you have connected
the external equipment and the antenna.
Only connect the television using the power cord supplied to a suitable
earthed safety socket.
Do not use an adapter plug or extension lead which does not meet the
applicable safety standards. Do not tamper with the power cord.
Inserting batteries in the remote control
1 Open the battery compartment by removing the lid.
2 Insert the batteries (Mignon type, for example UM-3 or AA, 2x1,5V).
Observe the polarity (marked on the base of the battery compartment).
3 Close the battery compartment.
Note:
If the television no longer reacts properly to remote control commands, the
batteries may be flat. Be sure to remove used batteries.
The manufacturer accepts no liability for damage resulting from used
batteries.
Environmental note
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an
environmentally sound manner. Find out about the legal regulations
which apply in your area.
COMPONEN
T
LR
AUDIO
ANT IN
AV OUT
LRV
AC IN
PC-INHDMI
-
1
PC
Audio in
COMPONENT VIDEO INPUT
LR
AUDIO
ANT IN
AC IN
AV 2
AV 1
AV OUT
LRV
HDMI
-
2
YPbPr
TV R
1
2
3