Filter
Top Products
ENGLISH
54
OPERATION USING EXTERNAL DEVICES
-----------------------------
... using the SCART socket
(FBAS/RGB signal)
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, games con-
sole, video recorder, decoder.
7
Video signal: FBAS/RGB.
7
Audio signal: stereo, analogue.
7
»AV1« preset.
1 Connect the »AV1« socket on the television and
the corresponding socket on the external device
using a SCART cable (video and audio signal).
Activating a decoder
If a decoder is connected to the »AV1« socket,
this must be activated to provide an unencrypted
video/audio signal.
1 Open the menu with »MENU«.
2 Select »SETTINGS« with »
V
« or »
Λ
« and
press »OK« to confirm.
– The »SETTINGS« menu appears.
3 Select the »Decoder« with »
V
« or »
Λ
«.
4 Activate the function with »
<
« or »
>
«
(»On«).
5 Press »MENU« to end the setting.
... with S-Video signal
7
Suitable devices: DVD player/recorder, video
recorder, camera recorder, notebook, PC.
7
Video signal: Y/C.
7
Audio signal: stereo, analogue.
7
»S-VHS« preset.
1 Connect the »S-VHS« socket on the televi-
sion and the corresponding socket on the ex-
ternal device using an S-Video cable (video
signal).
2 Connect the »L R« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
... with an analogue TV signal
7
Suitable devices: Digital satellite receiver,
DVD player/recorder, set-top box, camera
recorder.
7
Video signal: FBAS.
7
Audio signal: stereo, analogue.
7
»AV2« preset.
1 Connect the »Video« socket on the television
to the corresponding socket of the external
device with an RCA cable (video signal).
2 Connect the »L R« sockets on the television
to the corresponding sockets of the external
device with RCA cables (audio signal).
Note:
7
There must not be a video signal at the
» Video« and »S-VHS« socket at the same
time. This could lead to picture disturbances.