Grundig Vision 6 32-6840 T CRT Television User Manual


 
SETTINGS
----------------------------------------------------------------------------------------------------
Searching for television stations
The television has an automatic tuning function, which first searches
for digital TV channels and then analogue ones.
You start the search and can then sort the television stations into your
order of preference.
There are 400 presets for digital channels and 99 for analogue
channels, to which you can assign TV stations from the antenna or
from the cable connection (analogue channels).
1 Press »8«, »1…0« or »
V
« or »
Λ
« to switch on the television from
standby mode.
– The »Installation Guide« menu appears when the device is first
switched on.
2 Press »
« or »
+
« to select the language.
Help:
If the »Installation Guide« menu does not appear on the screen,
make the setting by following the instructions on returning the tel-
evision to its factory condition on page 26.
Note
The antenna power supply may only be switched on if the an-
tenna is actually an active indoor antenna with a signal amplifier
and it is not already supplied with a voltage via a mains plug
(or similar supply).
Otherwise you may cause a short circuit and irreparably damage
your antenna.
3 Select the »Active Antenna Power« with »
V
« or »
Λ
«.
Press »
« or »
+
« to switch on the antenna voltage (»On«).
4 Select »Auto Tuning« with »
V
« or »
Λ
« and confirm with »«.
– »Country Selection« is active.
5 Press »
« or »
+
« to select the country.
6 Select the »Scan Type« with »
V
« or »
Λ
«.
Press »
« or »
+
« to select whether you want to search for only
digital television stations (DTV), only analogue television stations
(ATV) or both (ATV & DTV).
7 Select »Time zone« with »
V
« or »
Λ
«.
Press »
« or »
+
« to select time zone.
8 Press »« to start the search.
– The »Searching...« menu appears, and the search for TV
stations begins. This may take several minutes depending on
the number of television stations received.
– The search is ended when the »Programme Table« appears.
Note:
The search can be ended prematurely with »i«.
13
ENGLISH
Please select country and scan type, then press OK to start tuning
Country Selection
Scan Type
Time Zone
Deutschland
s
a
ATV & DTV
Berlin GMT+1
Searching...
57 % UHF CH49 DTV
ZDF
ZDFinfokanal
SAT.1
N24
ProSieben
kabel eins
Exit
●●●●●●●●●●●●●●●●
DTV
DTV
DTV
DTV
DTV
DTV
Skip
Z
Installation Guide
Language Settings English
Active Antenna Power Off
Select
Exit
Auto Tuning
s
Installation
Menüsprache Deutsch
Aktivantenne Aus
Auswählen
Ende
Programmsuchlauf
s