Grundig VISION 7 37-7952 T CRT Television User Manual


 
42
Connecting a PC
1 Connect the socket »PC-IN VGA« on the television to the corre-
sponding socket on the PC using a VGA cable.
2 Connect the socket »PC AUDIO IN« on the television to the
corresponding socket on the PC using a cinch cable (audio
signal).
Note:
Adjust your PC to the monitor (for example, picture resolution
1280 x 768, picture frequency 60 Hz).
Selecting the channel position for the PC
1 Press »AV«, select the »PC« channel with »
V
« or »
Λ
« and press
»
« to confirm.
Settings for the PC
1 Open the menu with »i«.
– The »PICTURE« menu is displayed.
2 Select the »PC SETUP« menu with »
« or »
+
« and confirm with
»
«.
3 Select the function or setting you want with »
V
« or »
Λ
« and press
»
« or »
+
« to execute it.
– Options:
»Auto Adjust« For automatic PC configuration;
»Horizontal Position« Adjust the picture position horizon-
tally;
»Vertical Position« Adjust the picture position vertically;
»Size« Set the cycle frequency;
»Phase« Remove horizontal flicker, blurring
and horizontal lines.
4 Press »i« to finish the settings.
PC MONITOR MODE
----------------------------------------------------------
PC SETUP
Auto Adjust
Horizontal Position 45
●●●●●●●●
Vertical Position 45
●●●●●●●●
Size 0
●●●●●●●●●●
Phase 50
●●●●●●●●●
Select
Back
Exit
Z
1