Filter
Top Products
SAFETY PRECAUTIONS
• Before using the Network Digital Video Recorder, please ensure that you read and
understand the safety precautions described below. Always ensure that the Network Digital
Video Recorder is operated correctly.
• The safety precautions noted on the following pages are intended to instruct you in the safe
and correct operation of the Network Digital Video Recorder and its accessories to prevent
injuries or damage to the self, other persons and equipment.
• In this Instruction Manual, the term “Network Digital Video Recorder”, “68A00-1”,
“equipment”, and “device” refers primarily to the Network Digital Video Recorder and its
accessories such as power supply.
WARNING
• Do not cover the ventilation opening or slots on the outer casing. To prevent the Network
Digital Video Recorder from overheating, provide at least two inches of air space around the
vent and the slots.
• Do not drop metallic parts through slots. This could permanently damage the Network
Digital Video Recorder. Immediately turn the device’s power off or unplug the power cord
from the power outlet. Contact a qualified service personnel authorized by the equipment
distributor or a HAI customer help desk.
• Do not attempt to disassemble or alter any part of the equipment that is not expressly
described in this guide. Disassembly or alteration may result in high voltage electrical
shock. Internal inspections, alterations and repairs should be conducted by qualified
service personnel authorized by the equipment distributor or HAI customer help desk.
• Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to
do so may result in fire or electrical shock. Immediately turn off power to the equipment
and remove the power cable from the power outlet. Confirm that smoke and fume
emissions have ceased. Please consult the Network Digital Video Recorder distributor or
the closest HAI customer help desk.
• Stop operating the equipment if a heavy object is dropped or the casing is damaged. Do
not strike or shake. Failure to do so may result in fire or electrical shock. Immediately
turn the Network Digital Video Recorder’s power off or unplug the power cord from the
power outlet. Please consult the Network Digital Video Recorder distributor or the closest
HAI customer help desk.
5
68A00-1 NETWORK DIGITAL VIDEO RECORDER