Haier 29FA18 TV Receiver User Manual


 
CH+
CH-
VOL+
VOL-
MENU
CH+
CH-
VOL+
VOL-
MENU
ASM U 0
STOP
There are three ways of searching: automatic search, manual search and MFT
(manual fine tune).
You may operate it either on the TV or on the remote control. Here is mainly about
the remote control.
Automatic search
Tuning
Automatic search
1. Press MENU button
continuously, until select
TUN menu.
2. Press CH+/- button to move
the indicator to AUTO MEMORY.
3. Press VOL+, then AUTO MEMORYmode will work.
The TV set will search automatically all available programs
then all available programs will be stored in turn and the
TV set will return to the first channel.
If you want to stop the search, just press VOL- button.
The order of the automatic search is due to the frequency
of the program, generally speaking, it is used only at the
first time you search the program, and once the order of
the program has been confirmed, you don't have to use
this function, otherwise the order of the program will be
changed.
After searching
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel, it may be
the color system has not been set properly, so you
should adjust it to the proper system (Reference to
page 8).
TUN
POS. EDIT
POS. EX.
SEARCH UP
AUTO MEMORY
POS. EDIT
POS. EX.
SEARCH UP
AUTO MEMORY
TUN