Filter
Top Products
Basic Operation Instruction
15
Power On
Plug power cord into the electrical socket and press '' '' key on the front panel, then
press ''Power'' key on the remote control to turn on the TV.
Standby
Press ''Power''key on the remote control. TV will be in standby.
Special Attention:
1.TV will automatically turn to standby if there is no signal input for 5 minutes
when TV turns on.
2.T rn to standby when the
Signal Source Selection
Press ''SOURCE'' key either on the remote control or on the
front panel. ''MENU OF SIGNAL SOURCE'' will be displayed
on the screen. Then press ''Up/Down'' key on remote control
or "CH+/CH-" key on the front panel to choose the signal
source such as
. Press ''OK'' key on the remote
control or ''MENU" key on the front panel and TV will switch
the current signal source to the signal source you choose.
set
V set will automatically tu preset time of turning off
reaches.
TV, AV1, AV2, S-VIDEO1, S-VIDEO2, YPBPR,
HDMI1, HDMI2, PC, USB
TV
AV1
AV2
S-VIDEO1
S-VIDEO2
YPBPR
HDMI1
HDMI2
PC
USB
50
50
50
50
50
CONTRAST
BRIGHTNESS
HUE
SATURATION
SHARPNESS
PICTURE MODE
SCALE
COLOR TONE
3D NR
STANDARD
FULL
NORMAL
MIDDLE
PICTURE
SEL ADJ
MENU
EXIT
Menu Operation Instruction
Press ''MENU'' key on the remote control or on the front panel. The TV will display the
main menu.
1. Press ''Left/Right'' key on the remote
control or ''VOL+/VOL-''key on the front
panel to select the adjustment sort menu,
which includes 5 sorts:
2. Press ''Down''key on the remote control
or ''CH-'' on the front panel to enter the
adjustment sort menu.
3. Press ''Up/Down'' key on the remote control
or ''CH+/CH-'' on the front panel to select what is needed to adjust in sort menu.
4. Press ''Left/Right'' key on the remote control or ''VOL+/ VOL-''on the front panel to
adjust the value or setting.
5. Press ''Menu'' key to exit the main menu when the TV displays the Main Menu;
Press ''Menu'' key to return to previous menu when the TV displays the submenu;
PICTURE, SOUND,
OSD, ADVANCE, TV.