Filter
Top Products
18
Basic Operation Instruction
SLEEP - TIMER
DCC
BLUE SCREEN
RESETTING
ADVANCE
SEL ADJ
MENU
EXIT
OFF
OFF
ON
50
50
15
100
OSD - H POSITION
OSD - V POSITION
OSD - DURATION
OSD - HALFTONE
OSD - LANGUAGE
ENGLISH
OSD
SEL ADJ
MENU
EXIT
Option Function Description
Select to enter the ADVANCE submenu.
Press "Up/Down"key on the remote control
or "CH+/CH-"key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the"VOL+/VOL-" key on
the front panel to adjust analog value or state
(see below table).
SLEEP - TIMER
DCC
BLUE SCREEN
RESETTING
Set sleep time of the machine
Resume to setting of factory
Open or close DCC
Open or close BLUE SCREEN
"",
"ON/OFF", two states.
"ON/OFF", two states.
Off, 15M, 30M, 45M, 60M, 120M unit: minute.
Reset all values to setting of factory.
OSD
Select to enter the OSD submenu. Press
"Up/Down" key on the remote control or
"CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on
the remote control or the "VOL+/VOL-" key
on the front panel to adjust analog value or
state (see below table).
ADVANCE
OSD-H POSITION
OSD-V POSITION
OSD-DURATION
OSD-HALFTONE
Option Function Description
OSD LANGUAGE
Choose OSD menu display language
Adjust H-position of OSD menu
Adjust V-position of OSD menu
Adjust duration of OSD menu
Adjust halftone of OSD menu
Increasing analog value, OSD menu move toward right;
Decreasing analog value, OSD menu move toward left (0-100).
There are many languages to select
Increasing analog value, OSD menu move toward down;
Decreasing analog value, OSD menu move toward up(0-100).
Increasing analog value, extend duration time of OSD menu; (5-60).
Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).