Filter
Top Products
CH+
CH-
VOL- VOL+
MENU
Watching TV
Watching TV program
How to select TV program
Select the desired program
Select the desired sound
You can watch TV program in a presetting channel.
1 Using "Program number" buttons
2 Using the CH+/- buttons
If the colour of some channel is abnormal
If picture colour is abnormal
Press the CH+/- buttons to select "COLOR SYSTEM",
then press the VOL-/+ buttons to select the correct colour
system. In general, you can set it as "AUTO" AUTO,PAL,
NTSC and NTSC443 will display in turn .
TUNING
BAND VHFL
SKIP OFF
PROG NO 0
SEARCH
FINE TUNE
AUTO SEARCH
COLOR SYSTEM AUTO
Directly enter the channel number with the numeric keypad
on the remote control.
To select channel numbers from 10 ~ 99 press [-/--] button
and enter the two digit channel number
To select channel numbers from 100 ~ 218 press [-/--] button
twice and enter the 3 digit channel number
CH+
CH-
VOL- VOL+
MENU
Press the CH+ button to select a channel number in number
direction.
Press the CH- button to select a channel number in number
direction.
increasing
decreasing
Press the VOL-/+ buttons on the remote or the front of the
TV set to adjust the volume level. The range is 0~99. When
the volume buttons are pressed the volume level is
displayed automatically on the TV screen.
Usually this should be set in the
Auto position. However if the
colours displayed on the screen
are incorrect you can manually
select the correct colour system.
When finish remember to turn it
back to auto again so that other
programs will still work correctly.
Press the TUNE button and the
setting menu shown on the right
will display on the screen.
TUNE