Filter
Top Products
Operation
Operation
In the manual, the OSD (on screen display) may be
different fromyour TV's, because it isjust an exampleto
help you with theTV operation.
There are several options you might need to set up in order
for yourTVtoworkproperly. Read the instructions that
follow.
Initial Setup: Set according to the screen display.
Switching On/Off the TV set
1. First, connect power cord correctly.
2. Select the viewing source by using INPUT button on
the remote control.
3. When finished usingthe TV, press POWER button on
the remote control. TheTV reverts to standby mode.
4. If you intend to be awayon vacation, disconnect the
power plug fromthe walt powerouttet.
Note
If theTV in power on, the screen show information
according the type of input signal, the information wilt
disappear. If there is no signal, "No Signal" will display
on the screen.
Choose the Menu Language
When you startusing your setfor the first time, you must
select the language which will be used fordisplaying menus
and indications.
1. Choose TV Input and then press MENU button.
2. PressA/V button to selectFunction menu.
3. Pressl_ or ENTER button and then use A/V button to
select Language.
4. Press</l_ button to select language.
(English, Spanish orFrench)
"_ Video
_i:,,m
_<_,, Audio
{_S Channel
MR
:_-/ Lock
Language English qb ]
OSD Timeout Short db
OSD Transparency Middle qb
Screen Mode Normal qb
Blue Screen On qb
DPMS On qb
Time Setup DDb
Closed Caption DDb
Default DDb
Function _ s_o__B_ok
Choose the Input source
Change the picturesource so you can watch yourTV,
VCR, DVD, Cable, orany other devicesthat are
connected to yourTV.
1. Press INPUT button to enter the Select Source menu
and then useA/Y button to select the desired items
(TV, Video1, Video2, S-Video,Component1, Component2,
VGA, HDMI1,HDMI2,HDMI3,HDMI4).
2. Press ENTER button to confirm .
Select Source
TV
Video1
Video2
S-Video
Component1
Component2
VGA
HDMI1
HDMI2
HDMB
HDMt4
18 TV LCD-TFT