Haier HL42E Flat Panel Television User Manual


 
CCHH LL IISS TT FF
AAVV..LLSS
TT
II
AAUUDDIIOO
II SSTTLL
EEEDDDOOOMMMVVVTTT EEEDDD
OOO
MMM
TVTVTV
ZOOM
ZOOMZOOM
RETURN
TI
M
E
TI
M
E
POWER
Turns your TV or any other programmed
equipment on or off, depending on mode.
- The remote controller cannot be operated unless the batteries are properly loaded.
Function introduction
- When using the remote control, aim it at the remote control sensor on the TV.
SAP
Selects MTS sound: Mono, Stereo, and SAP in Analog
mode. Change the audio language in DTV mode.
Introduction
FAVORITE
Open the favorite channel list.
THUMBSTICK
(Up/Down/Left/Right/OK)
Allows you to navigate the on-screen menus and adjust
the system settings to your preference.
CHANNEL UP/DOWN
Selects available channels
P.MODE
Selects the picture appropriate
for the program`s character.
FREEZE
Freezes the currently-viewed picture, but audio continues.
Press FREEZE button again to resume the normal picture.
ARC
(Aspect Ratio Control)
Changes the aspect ratio.
S.MODE
Selects the sound appropriate for the program's
character.
VOLUME UP/DOWN
Increases/decreases the sound level.
Numeric buttons
press to change the channel.
EXIT
Clears all on-screen displays and
returns toTV viewing from any menu.
INPUT
show the input source mode.
MUTE
Switches the sound on or off
CC(closed caption)
Select a closed caption:
CC MUTE, CC ON, CC OFF.
TIME
Shows time.
INFO
When you watch the TV, press the key, the information
displays on bottom of the screen.
MENU
Brings up the main menu to the screen.
TV
Press to enter TV signal
SLEEP button
Displays the Sleep Timer option.
Q.VIEW
Switch the current channel to the last channel
you have viewed.
CH.LIST
Open the channel list.
Remote Controller
TV USB
Press the SELECT button repeatedly to select one of the
system modes in which the remote control can be used.
When the desired device is selected, the corresponding
LED lights on 5seconds.
.
/ Rewind / Fast
/ backward /Forward
Play
II Pause
AUDIO.LIST
Open the audio channellist.
- button
Press to select additional channels
(digital and analog)
being broadcast by the same station.
For example, to select channel
“54-3”, press “54”, then press “-” and “3”.
LIGHT
Press the light button, white LED will be ON, release
this key, white LED will be OFF.
8 TV LCD-TFT
USB
Press to enter USB signal
ZOOM( only SUB System)
To enlarge or lessen the picture
Note: For DVD function see page 35.
HOTKEY
CC HH LL IISSTT FF
AAVV..LLSS
TT
II
AAUUDDIIOO
IISSTTLL
EEEDDDOOOMMMVVVTTT EEEDDD
OOO
MMM
TVTVTV
ZOOM
ZOOMZOOM
RETURN
TI
M
E
TI
M
E
HOTKEY
RETURN
HOTKEY
( only SUB System)
Call up the menu