Filter
Top Products
USB and Card Reader setup
Note: Memory cards or USB devices are not supplied with this TV.
USB setup
1 Insert USB in the card slots at the right side of TV.
2 Insert it to be clicked in.
3 Press USB button on the remote controller to enter the stream media system.
CARD setup
USB System
1 Jack of card Instructions
Jack of SM card
Jacks of SD MMC MS card
Jack of CF card
Jack 1
Jack 2
DIGITAL MEMORY CARD
COMPACT FLASH
128
MB
2 Insert the card as right direction. As following Card in common use
1 CF card
jack
CARD
MULTIMEDIA
128
MB
2 MMC card
3 MS card
MEMORY STICK
128MB
4 SDcard
SD
128MB
This TV is Compatible with the card of SD/MMC/CF/MS format.
How to use
jack jack
jack
Note
1.Please note chooses uses
the digital memory card with
you corresponds the receptacle
2.Card reader in 1 cannot
simultaneously insert two kind
of cards in the graphical
representation position
Note:
1.the card insertion time, after the flows media system starts 2s , insert the card
to numerical code card reader , do not bring card to start flow media system.
2. After card insertion, indicator light will shines, and enters glitters condition,
after period of time , indicator light enters constant bright condition, indicates
already distinguishes finished, this time carries on play operation and so on .
3, In the market ,the digital card type are very many, please uses standard
product of the standard factory , meets reads takes difficult or reads speed
limits, please replaces the digital card.