Haier HLC22R1 TV DVD Combo User Manual


 
i_VCR Setup
j
- To avoid picture noise (interference), leave an adequate distance between the
VCR and TV
Connection and use steps:
1.Read the user guide supplied with your AV devices and ensure that it has
Composite or S-Video connectors;
2.Make sure that the power of the LCD-TV and the AV device are off;
Connection Option 1
Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from
the VCR's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to VCR, match
the jack colors (Video = yellow, Audio
Left = white,and Audio Right = red).
If you connect an S-VIDEO output from
VCR to the S-VIDEO input, the picture
quality is improved; compared to conne-
cting a regular VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner' s
manual.)
3.Turn on the LCD-TV first " and then turn on the
power of the AV device;
4.Press INPUT button to set
the video input mode of the
T--
LCD-TV to S-Video mode or
Video mode.
HDMM!nPUt.......
How to connect
Connect the cablesfromtheexternalequipment's
output jacks tothe TVinput jacks, asshown in thefigure.
How to use
1. Select the input source by using INPUT button
on the remotecontrot or onthe TV.
2. Operate the corresponding external equipment.
Refer to external equipment operating guide.
@