Filter
Top Products
DVI-DTV OUTPUT R AUDEO L
RGB-DTV OUTPUT R AUDEO L
YPbPr
R AUDEO
AUDIO
AUDIO
DVI IN
AUDIO
VGA IN
VGA Pr/Cr Pb/Cb Y
LR
AUDIO
AUDIO
S-VIDEO
Pr/Cr Pb/Cb Y
LR
VIDEO
LR
DVD setup
How to connect
1. Connect the DVD video outputs (Y, Pb/Cb,
Pr/Cr) to the COMPONENT (Y, Pb/Cb, Pr/Cr)
INPUT jacks on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on
the TV, as shown in the figure.
2. If your DVD only has an S-Video output
jack, connect this to the S-VIDEO input on
the TV and Connect the DVD audio outputs
to the AV IN jacks on the TV, as shown in the
figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the S-Video button on the remote
control to select S-VIDEO mode.
3. Press Play button on external equipment
for program play.
4. Refer to the DVD player's manual for
operating instructions.
External Equipment Connections
DVD
or
DTV setup
-To watch digitally broadcast programs,
purchase and connect a digital set-top box.
How to connect
Use the TV`s COMPONENT (Y, Pb/Cb,
Pr/Cr) INPUT jacks, VGA or DVI port for
video connections, depending on your set-
top box connections available. Then, make
the corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer to
the owner`s manual for the digital set-top
box.)
2. Use PC/DVI on the remote control to
select PC or DVI (Y, Pb/Cb, Pr/Cr) mode.
3. Press Play button on external
equipment for program play.
Digital Set-top Box
or
or
10
IN IN IN IN
IN