Filter
Top Products
OSD Menu
12
2. PICTURE menu
See [Basic Operation] for using the menu system.
Picture Mode: Choose from Dynamic,Standard,Mild and User, Set this to your preference using
the<>buttons. Press OK to memorise.
Note: Contrast, Brightness, Color and sharpness can be adjusted in the User mode only.
They are set in the same way as picture mode.
Contrast: Controls the difference between the brightest and darkest regions of the picture.
Brightness: Controls the overall brightness of the picture.
Color: Control the color saturation.
Sharpness: Increase this setting to see crisp edges in the picture; decrease it for soft edges.
Tint: Controls the tint ( NTSC mode only).
Color Temperature: Choose from Medium, Cool and Warm.
Noise Reduction: Choose interference noise modes form Off, Low, Middle and High.
OSD Menu
3D Type:
Choose from Off, Side Byside, Top Botton, Line By Line.
Exchange 3D L/R:
Choose from L/R, R/L.
2D to 3D:
Choose from Off, On.
3D to 2D:
Choose from Off, Side Byside, Top Botton.
3D Option
3D to 2D
O f f