Haier LE24K300 Flat Panel Television User Manual


 
Power On
Plug power cord into the electrical socket, press '' '' button on right side lower part of the back cover , then press '' ''
key on the back cover, or press ''Power'' key on the remote control to turn on the TV.
Standby
Press ''Power''key on the remote control. TV will be in standby.
Special Attention:
1. TV set will automatically turn to standby if there is no signal input for 5 minutes when TV turns on.
2. TV set will automatically turn to standby when the preset time of turning off reaches.
3. If you do not use it for a long time ,please turn off the power supply for the machine . Do not let the machine work in
standby state for a long time.
Signal Source Selection
Press ''SOURCE'' key either on the remote control or on the front panel. ''MENU OF SIGNAL
SOURCE'' will be displayed on the screen. Then press ''Up/Down'' key on remote control or
"CH+/CH-" key on the front panel to choose the signal source such as
. Press ''OK'' key on the remote control or ''MENU" key on
the front panel and TV will switch the current signal source to the signal source you choose.
TV, AV1, AV2, SVIDEO,
YPbPr, HDMI1, HDMI2, PC, USB
Basic Operation Instruction
TV
AV1
AV2
SVIDEO
YPbPr
HDMI1
HDMI2
PC
USB
19
HAIER 19L11A / 22L11A / 23L11 ( )(6M16