Filter
Top Products
11
3. Remote control:
Remove the cover of the battery
compartment. Insert the 2 supplied
batteries (Type AAA 1.5V).
HTR-D11
HTR-D11
4. Power:
Insert the power cord in the wall
socket with AC power supply.
5. Turn the TV on:
Press the Power key on the remote
control or the front panel touch
control keys. The TV will turn on
within a few seconds.
Power Key
Please make sure to connect the power
plug to the wall outlet socket after
connecting the TV to the power cord!
1. Install the base stand; place the
TV on a solid surface.
Min
1 m
Ensure that the TV is placed in
a position to allow free flow of
air. Do not cover the ventilation
openings on the back cover.
To prevent any unsafe situations, no
naked flame sources, such as lighted
candles, should be placed on or in
the vicinity.
Avoid heat, direct sunlight and
exposure to rain or water. The
equipment shall not be exposed to
dripping or splashing.
2. Connect the antenna cable or
CATV cable to the aerial socket
ANT IN 75
Ω
at the back of the
TV set.