Filter
Top Products
Basic Receiving and Playing Operations
LED -LCD television Owner’s Manual 21
Source Lock
This function is used to prohibit watching a program
from various external inputs, e.g. AV and PC, etc. Press
/
to select a certain option, and then press OK
to enter the submenu, press
/
to set an external
input lock ON or OFF. If an external input lock is set
ON, after entering this mode, the screen will display
blue background with muting and a prompt Source
Lock; during Source Lock prompt, Source Lock will
remain if there is no other display on the screen. To
watch a program from a locked external input, just
enter Source Lock submenu to set corresponding
status as OFF or execute the Unlock option in the Lock
Set menu.
Child Lock Setting
Press
/
to select the Child Lock option, and then
press
/
to set ON or OFF. If set ON, this control
key will not respond, and the screen will display Child
Lock when the key is pressed; if no other operation is
made, the display will automatically disappear later.
To resume Child Lock function, just enter the Lock Set
menu to set Child Lock OFF or execute the Unlock
option.
Max Volume Setting
Press
/
to select the Max Volume option, and
then press
/
to freely adjust the max volume
within the range of 0~100. After finishing the setting,
the max volume in the Volume menu will not exceed
the preset max volume; for example, if the preset
max volume is 30, the volume in the Volume menu
can not be increased any longer upon reaching 30;
if the preset max volume is less than the value in the
Volume menu, the latter will decrease along with the
decrease of preset max volume.
Power on Volume
Press
/
to select the Power on Volume option,
and then press
/
to freely adjust the volume
within the range of 0~100.
Unlock Setting
Press
/
to select the Unlock option, and then
press OK to clear all the lock settings, namely set all
the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
Advanced function
To watch a 3D TV
If the TV is currently in the 2D
mode:
Stand-by switch
3D switch key
Press the 3D switch key on the remote control A
to call out the prompt menu. (See Fig. 1 below)