Filter
Top Products
Maintenance / Troubleshooting
LED -LCD television Owner’s Manual 25
Note
The red button on the control can doing some ❏
delete. Text playback support TXT format.
To exit the Text mode, just press D BACK repeatedly.
Settings
After entering USB main interface, press A
/
to
select the Settings option.
Press
B OK to confirm the selection and enter the
settings selection interface, and then press
/
to select the required options.
Photo Slide Time
Set the scan speed of pictures to be scanned in slide
form.
There are three options (Middle/Slow/fast). Press
/
to select the desired option.
Movie Subtitle
Press
/
to select "ON" or "OFF".
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power o and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust o your screen A
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is o the screen, and
B
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
Problem Possible remedies