Haier P50V6-A8 Flat Panel Television User Manual


 
VGA
AUDIO
VGA IN
AUDIO OUT
L R
How to connect
1. To get the best picture quality, adjust the PC
graphics card to (>1024
2. Use the TV`s VGA port for video
connections, depending on your PC connector.
If the graphic card on the PC does not output
analog and digital RGB simultaneously, connect
only one of eitherVGA to display the PC on the
TV.
If the graphic card on the PC does output
analog and digital RGB simultaneously, set the
TV to eithe ; (the other mode is set to Plug
and Play automatically by the TV.)
3. Then, make the corresponding audio
connection. If using a sound card, adjust the PC
sound as required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER
button on the TV's remote control.
3. Use TV/AV on the remote control to select PC.
x768),60Hz.
IN
IN
r VGA
External Equipment Connections
PC connection
or DVI source.
4. Check the image on your TV. There may
be noise associated with the resolution,
vertical pattern, contrast or brightness in
PC mode. If noise is present, change the
PC mode to another resolution, change
the refresh rate to another rate or adjust
the brightness and contrast on the menu
until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the
manufacturer of the PC graphic card.
NOTES:
1 Use a VGA cable.
2 Avoid keeping a fixed image on the TV's
screen for a long period of time. The fixed
image may become permanently
imprinted on the screen.
3 The synchronization input form for
Horizontal and Vertical frequencies is
separate.
Resolution
Frame
frequency
(Hz)
Line
frequency
(Khz)
VGA
SVGA
XGA
640*480 31.5KHz 60Hz
800*600 37.9KHz 60Hz
1024*768 48.4KHz 60Hz
Mode
Resolution