Filter
Top Products
DVI-DTV OUTPUT R AUDEO L
RGB-DTV OUTPUT R AUDEO L
YPbPr
R AUDEO
DVI
VGA
AUDIO
DVI IN
AUDIO
VGA IN COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R
ANT IN
COMPONENT IN
Pr/Cr Pb/Cb Y L-AUDIO-R
SCART2 SCART1
How to connect
1. Connect the DVD video outputs (Y,
Pb/Cb, Pr/Cr) to the COMPONENT IN jacks
on the TV and connect the DVD audio
outputs to the AUDIO IN jacks on the TV, as
shown in the figure.
2. If your DVD only has an SCART output
jack, connect this to the SCART input on
the TV. as shown in the figure.
NOTE: If your DVD player does not have
component video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/AV button on the remote
control to select SCART mode.
3. Press Play button on external equipment
for program play.
4. Refer to the DVD player's manual for
operating instructions.
-To watch digitally broadcast programs,
purchase and connect a digital set-top
box.
How to connect
Use the TV`s COMPONENT IN, VGA or DVI
port for video connections, depending
on your set-top box connections
available. Then, make the
corresponding audio connections.
How to use
1. Turn on the digital set-top box. (Refer
to the owner`s manual for the digital
set-top box.)
2. Use TV/AV on the remote control to
select DVI mode.
3.Press Play button on external
equipment for program play.
DTV connection
DVD connection
External Equipment Connections
DVD
or
Digital Set-top Box
or
or