Filter
Top Products
User’s Manual
FRONT PANEL CONTROL
x
Power Button:
Press this button to switch ON/OFF monitor’s power.
x
Power Indicator:
Green — Power On mode.
Orange — Power Saving mode.
x
MENU / RETURN:
1. Turn the OSD menu on/off or return to the previous menu.
2. Exit OSD menu when in volume OSD status.
x
Adjust < >:
1. Navigate through adjustment icons when OSD is ON or adjust a function when function is
activated.
x
i Button:
1. Press the i button to select the input signal type. (There are VGA, DVI, YpbPr options available
but what port you can actually select depends on your model.)
2. The OSD menu is used as “confirmation” function during start-up.
3. Press and hold this button more than 3 seconds will start ψAuto Adjustω function when using
VGA input only. (The auto adjustment function is used to optimize the ψhorizontal positionω,
ψvertical positionω,ψclockω,and ψphaseω.)
NOTES:
x Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
x Save the original shipping box and packing materials, as they will come in handy if you ever have
to ship your monitor.
x For maximum protection, repackage your monitor as it was originally packed at the factory.
x To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
12