Filter
Top Products
27
Switching Source Signals
Press the SOURCE button on the
remote control or the
TV/AV button
on the control panel to select the
incoming source signal.
The current source setting CH XX
appears on the top left corner of
the screen; AV1 or AV2 appears on
the bottom right corner of the
screen.
Note:
The TV supports S-Video input in addition to normal video and audio
signals. The TV detects the signal type automatically and gives priority to
S-video when two signals are detected at the same time. This auto
detection function is only available for AV2.
Adjusting the Volume
Press the VOL UP button to
increase the volume. Press the
VOL DOWN button to decrease the
volume. The volume level is dis-
played on the TV.
Press the
MUTE button on the
remote control to turn the sound
off. The word “Mute” appears on
the top left corner of the screen
and sound is temporarily turned
off.
Press the
MUTE button on the remote control or press the VOL UP but-
ton or VOL DOWN button
to restore the original volume.
CH 40
AV1
TV/AV
Current source setting
TV/AV (Source)
Volume up
Volume down
MUTE