HANNspree MAC-001056 Flat Panel Television User Manual


 
55
Remote control doesn’t work. Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control
and the sensor is clear.
Try operating the remote control at a closer dis-
tance to the TV. Don’t exceed an angle of 30
o
from the sensor.
No image but have sound.
Make sure the video signal cable is connected
properly.
No sound but have image.
Make sure the source device is functioning
properly.
Set the volume to a higher level.
Make sure the audio cable is connected
securely.
Turn the mute off.
Screen image turns over.
Make sure the video signal cable is connected
properly.
Snow appears on the screen.
Adjust the location of the antenna, placing it far
from roads or sources of interference.
Check the antenna and the video signal line
connections.
Blurred or overlapped images.
Readjust the sharpness setting.
Choose programs with high quality signals.
Adjust the direction of the antenna or change
the video signal cable.
Situation Solution