Filter
Top Products
36
2.2.10 Connecting Digital TV
1
Connect one end of the VHF/UHF (Antenna) or CATV cable to ANT
Jack (RF-in Digital) on the back of the TV.
2 Connect the other end of the VHF/UHF (Antenna) or CATV cable to
the antenna socket of the digital TV device.
Notes:
• If you cannot receive channels after connecting to an antenna or cable
TV line, try scanning for channels. See “Auto Search” on page 80.
• RF-in digital input is available for DTV built-in models only.
DTV