Filter
Top Products
CODE SEARCH: Used to program the remote or to
search through codes.
LED INDICATOR LIGHT: The LED ashes to show
that the remote is working properly. Please note:
The LED Indicator Light will activate whenever
a button is pressed and will deactivate when the
button is released. The LED Indicator light will also
blink when codes are entered into the Remote.
ON/OFF BUTTON: Operates the same as your
original remote. Some RCA, GE and ProScan
models require you to press the device button to
turn on the unit and press the remote ON/OFF but-
ton to turn it off.
SLEEP: Allows you to set a time for you to turn off
your device automatically.
GUIDE: Brings up the on-screen TV program
guide, if your TV has that feature.
MENU: Brings up the Main Menu. If you already
have the menu system, press SELECT to choose a
highlighted choice.
GO BACK: Allows you to go to the previous chan-
nel.
MUTE: Mutes volume on TV.
CABLE, TV, VCR, DVD, SAT: Used to select the
device you want to control.
0-9 NUMBER BUTTONS: The number buttons
operate the same as on your original remote and
are used to enter device codes.
ENTER: Used to complete channel selection for
some brands of TV.
TV/VCR: Operates the TV/VCR function of your
VCR.
NAVIGATION BUTTONS: Used to move though on
screen menu and guide. With some DBS models
up and down. On some DBS models the info But-
ton should be used to select the highlighted item.
VOLUME BUTTONS: Increases or decreases the
volume.
CHANNEL BUTTONS: Increases or decreases the
channel numbers.
REVERSE, PLAY, FORWARD, REC: These but-
tons are for DVD//VCD/DVR use and operate the
same as your original remote. You must press the
RECORD button twice to start recording.
INFO: Shows the date and the time if your TV or
VCR has that feature.
CLEAR: Removes the on screen display to return
to normal viewing.
BATTERY INSTALLATION
Remove the battery compartment cover from 1.
the back of Remote.
Install (2) “AA” batteries, making sure to 2.
install according to indicated polarity.
Slide battery compartment battery over bat-3.
teries and snap into place.
OPERATING INSTRUCTIONS
For TV only (direct entry)
Find your brand and code in the lists on 1.
pages 7and 8 and follow the steps below.
Press the Code Search Button (1) until the 2.
LED Indicator turns on. Then release the
button.
Enter the corresponding 3-digit code. After a 3.
valid code entry, the LED Indicator turns off.
In case of an invalid code entry, the LED will
ash.
With the unit (TV, DVD) on, press the Chan-4.
nel Up Button (5). If the TV responds, no
further programming is needed. If it does
not, try another code listed from your brand.
Use the chart below to record your codes for 5.
easy reference.
TYPE UNIT CODE
TV
VCR
SAT
DVD
CABLE
If the unit does not respond after trying all 6.
the codes listed for your brand, do a manual
code search by doing the following steps.
BUTTON FUNCTIONS
SKU 65785 For technical questions, please call 1-800-444-3353. Page 3