Filter
Top Products
Note2: For more detailed information, please refer to the pages that follow.
Note1: All buttons mentioned above are on the remote control unless indicated otherwise.
-5-
3.Switching on/off
1)Connect the TV to power outlet. If the power indicator is red, it means the TV is off now. You need topress
the POWER button on the TV or the POWER button on the remote control to turn on the TV, and the power
indicator will light up in blue.
2)Press the power switch or thePOWER button on the remote control again to turn off the TV.
4.Signal source selection
Press the number [1-9] button or CH+or CH- button to select TV input; press theSOURCE button to select TV,
Video, S-Video, VGA or Component.
6.Channel search
In order to access this setting, you need to be in the Antenna (TV) source mode (press SOURCE button repeatedly).
1) Press the MENU button to enter the main menu.
2) Press the button to select the itemSearch, and press the
button to enterSearch menu.
3) Press the button to select the itemAuto Search.
4) Press the button to start auto searching for all available channels.
5)Once all the available channels have been memorized, you are now able to use the numerical buttons
or channel + / - buttons to watch the channel number you desire.
7.Picture adjustment
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
1) Press the MENU button to enter the main menu.
2) Press the button to select the itemPicture Parameters,
and press the button to enterPicture Parameters menu.
3) Press the button to select the item you want to adjust.
4) Press the button to adjust the level.
8.Audio adjustment
1) Press theMENU button to enter the main menu.
2) Press the button to select the item Audio Settings,
and press the button to enterAudio Settings menu.
3) Press the button to select the item you want to adjust.
4) Press the button to adjust the level.
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
[ ]
[ or ]
[ or ]
[ or ]
[ or ]
[ or ]
[ or ]
[ or ]
[ or ]
[ ]
[ ]
[ ]
quAlier
Treble
Bass
Balance
HeadPhone
Equalier
50
50
50
Audio Settings
Equalier
Britghtness
Contrast
Saturation
Sharpness
Color Temp
Normal
50
50
50
50
Picture Parameters
Hue
50
5.Air/Cable selection
In order to access this setting, you need to be in the Antenna (TV) source mode
(press SOURCE button repeatedly).
You can select the signal receiving method according to the following steps:
1) Press the MENU button to enter the main menu.
2) Press the button to select the item Search and press the
button to enterSearch menu.
3) Press the button to select the item Tuning Mode.
4) Press the button to change the item among Air,Cable .
5)Press OK button to confirm your selection. Press OK again to exit from the menu.
[ or ]
[ ]
[ or ]
[ ]