Hisense Group LCD2004US Flat Panel Television User Manual


 
Shortcut keys operation
Connecting POWER
1. Turn on the power of the connected video equipment.
2 P
3. The sound signal of all input signals except TV is inputted through the same AUDIO INPUT terminals.
ress the SOURCE button to toggle between the source inputs. Select among TV, Video, S-Video, VGA
or Component.
DISPLAY
INPUT TERMINAL
TV
Component
VGA
Antenna
Y PB/CB PR/CR
PC IN(D-Sub15)
Selecting the signal source
Press POWER on the remote control to turn off the LCD TV. The POWER indicator will turn red.
Press POWER again to turn the LCD TV back on. The POWER indicator will turn blue.
ON/OFF Standby
ComponentComponent
VGA VGA
S-VideoS-Video
VideoVideo
S-Video
S-Video
NOTE: The explanation about Video, and S-Video signals.
1.In signal input, the use the same channel.
2.Only one of these two signals can be input and received at one time. Therefore one of the inputs must
always be free. Otherwise the RCA Video and S-Video signals will affect each other.
Videoand S-Video signals
TVTV
Video
Video
Please pay attention to the power switch when you use ourTV product firstly. According to the instruction
of sticker label on theleft speaker you will find it and switch TV on easily.
Note:
LANGUAGE ENGLISHLANGUAGE ENGLISH