Hitachi 13K 50UX26B Projection Television User Manual


 
THE GENIUS REMOTE CONTROL (CLU-952MP)
25
THE GENIUS REMOTE CONTROL (CLU-952MP)
In addition to controlling the functions of your HITACHI Projection TV, the new remote is
designed to operate different types of VCR's, CATV (Cable TV) converters and Audio
equipment with one touch. Basic operation keys are grouped together in one area. All
other controls are separated from them and arranged in MULTI-PAGE sections, with a
display that can be switched to cover any of the three pages. Functions are arranged
and properly categorized into windows, making operation simple when multiple
functions are to be controlled.
To operate your TV, point the remote at the remote sensor of the TV and press the TV
POWER button. Press the TV button and the remote will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR. Slide the
MULTI-PAGE select switch to VCR and press the VCR POWER button to turn on the
VCR power. The remote will now control your VCR. (See page 27 for instructions on
how to program the remote to control your VCR.)
To operate your Cable Box, point the remote at the remote sensor of the cable box.
Slide the MULTI-PAGE select switch to TV/CABLE and press the CABLE POWER
button to turn on the cable box power. Press the CATV button and the remote will now
control your cable box. (See page 28 for instructions on how to program the remote to
control your cable box.)
To operate your Audio Equipment, point the remote at the remote sensor of the audio
component you would like to operate. Slide the MULTI-PAGE select switch to AUDIO
and press the button which corresponds to the component you would like to control
(AMP, CD, or TAPE). Press the AUDIO POWER button to turn on the audio component
power. The remote will now control your audio equipment. (See page 29 for instructions
on how to program the remote to control your audio equipment.)
Genius Remote Control Illustration
1 MULTI-PAGE select switch
This selects the button layout of the multi-page section of the remote control.
2 MULTI-PAGE buttons
These buttons change functions as shown on page 17.
3 LIGHT BUTTON
When you are in a dark room, press this button on the side of the remote to light up the
buttons shown in 4. The light will stay on for about 8 seconds if the light button is not
pressed again. These buttons will not appear to light if the room is too bright.