Hitachi 32LD4550U Flat Panel Television User Manual


 
ENGLISH
31
Turning On The TV
- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the / I, INPUT, P + - or
+ - button on the TV or press the POWER, INPUT, P + - or
+ - button on the remote control and the TV will switch on.
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after
turning on the TV, you can select the Language, Mode, Country,
Time Zone, Auto tuning.
Note:
a. Press the RETURN button to change the current OSD to the
previous OSD.
b. For those countries without conrmed DTV broadcasting
standards, some DTV features might not work, depending on the
DTV broadcasting environment.
Programme Selection
Press the P + - or NUMBER buttons to select a programme number.
Volume Adjustment
Press the + - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ - , or I/II button.