Hitachi 32LD9700C Flat Panel Television User Manual


 
27
ENGLISH
TV SETUP OPERATION (continued)
Setup Menu (AV mode)
With this menu, you can select or adjust the condition of the input signals from each terminal.
Selected Items Setup hint
System
System 1
Do not change the original setting.
(System1: Europe/Asia, System2:North America)
Composite and S-video input only.
System 2
Colour
system
AV1~AV5
System 1
Auto
Select the colour system depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], select the system according to the colour system
of the input signal.
Composite and S-video input only.
PAL
SECAM
NTSC4.43
NTSC3.58
System 2
Auto
NTSC-M
PAL-M
PAL-N
Video
Input
AV1
S.Video
For AV1 : Select depending on the type of input signal.
The default setting is [Composite].
Select [S.Video] when you want to watch S.Video image.
For AV4 : Select the colorimetry depending on the input
signal.
Generally, select [Auto].
In case that the colour is not displayed correctly, select
[HDTV] or [SDTV/DVD] to match the input signal.
Component Input only.
Composite
AV4
Auto
HDTV
SDTV/DVD
Scart
Output
DTT
AV1 (Scart) will be xed as the selected mode.
When selecting "Monitor", it is possible to monitor only
the composite video signal from AV2, AV3, AV4, AV5, TV,
or DTT input that is displayed on the screen at the same
time.
DTT output from scart is only available on 9700 models.
If "Descrambler" is set to ON when selecting other than
DTT, it will be xed as "TV" automatically.
TV
Monitor
Setup
System System 1
Colour System
Video Input
Scart Output TV
Select Set Return