Hitachi 32LD9700C Flat Panel Television User Manual


 
52
FUNCTION (continued)
Size Switching
Each time button of the remote control is pressed, the screen display size is
switched in sequence, and the status will be displayed at the bottom of the screen.
ZOOM button
Current Output
Image
(Input Signal)
Display Size To display suitable screen as follows.
Auto
Play a image with the suitable format by automatically selecting
depending on the picture format or programme being broadcast.
Default Zoom setting in the Function Menu will be selected if WSS
signal or size switching signal is not detected in DTT, TV and AV mode.
(Squeeze)
Full
Play a 4:3 image faithfully in the standard vertical size and horizontally
squeezed.
(Vista)
Zoom
Play a 16:9 image in 4:3 screen (Vista size) faithfully. *In some cases,
slight blanking may remain at the top and bottom.
(14:9 Signal)
C14:9L
Play a 14:9 image in 16:9 screen, which is expanded vertically and
squeezed horizontally. This mode is provided for the broadcasting
programme with WSS code-C14:9L.
(14:9 Signal)
14:9Zoom
Play a 14:9 image in 16:9 screen, which is expanded vertically. This
mode is provided for the broadcasting programme with WSS code-
14:9Zoom.
(4:3 Signal)
Panoramic
Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.
DTT/TV/AV1~AV3 signal input
Auto Full Zoom C14:9L 14:9Zoom Panoramic