Hitachi 32LD9700U Flat Panel Television User Manual


 
55
ENGLISH
CAUTION
Using a wide-screen monitor
This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different from the original. Take this into consideration
when making screen mode choices.
Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
re ecting original intention.
FUNCTION (continued)
Size Switching (continued)
RGB signal input
You can select suitable size depending on the resolution.
Normal Full Zoom1
Zoom3
Zoom2Real
*
Display Area Selection Diagram
Resolution Full display Circular display
Display Full Normal Real* Zoom1 Zoom2 Zoom3
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
In the signal display chart shown above, some compression or stretching has taken place. Flicker may be noticeable
in zoom1~3 modes depending on content.
To reduce this icker, turn “Vertical Filter” On from “Setup Menu” (
29
).
* Real mode gives the image with same shapes as that
of computer monitor.
This mode is only available for VGA(640x480) to
WXGA(1280x768).