Filter
Top Products
SET UP
44
SET UP
The COMPONENT SET function is very useful when setting up reception High Definition, Standard Definition
and NTSC signals.
Press THUMB STICK ̆ or ̄ to highlight then press down on THUMB STICK to select Color System (HDTV, SDTV/DVD)
Press EXIT to quit menu or THUMB STICK ̇ to return to previous menu.
COLOR SYSTEM
The COLOR SYSTEM function allows you to automatically change tint and color coordinate for DTV Programs.
HDTV - High Definition Television - Use for High Vision Signal Y-P
B
P
R
from HDTV Set-Top Box.
SDTV /DVD - Standard Definition Television or Digital Video Disc Y-C
B
C
R
such as DVD (Digital Video Disc Player).
COMPONENT SET
COMPONENT SET Y-P
B
P
R
1
COLOR SYSTEM
HDTV
SDTV/DVD
MENU TO MENU BAR TO QUIT EXIT
THUMB
STICK
THUMB
STICK
MENU TO MENU BAR TO QUIT EXIT
SETUP CUSTOMIZE VIDEO AUDIO THEATER
MENU TO MENU BAR TO QUIT EXIT
COMPONENT SET
COLOR SYSTEM
HDTV
SDTV/DVD
THUMB
STICK
PRESS SELECT TO
ACTIVATE/DEACTIVATE
PRESS SELECT TO
ACTIVATE/DEACTIVATE
1. MENU LANGUAGE
2. PLUG & PLAY
3. SIGNAL SOURCE
4. AUTO CHANNEL SET
5. CHANNEL MEMORY
6. CHANNEL LIST
7. CLOCK SET
8. ROTATION
9. COMPONENT SET
SETUP
SETUP
SELECT
NOTE: Set up a Component Signal (connect component to Y-P
B
P
R
input) and switch to VIDEO: 2 by pressing the INPUT button
on the Remote Control when planning to use the component set function.
NOTE: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be
abnormal.
2. You must be tuned to VIDEO: 2 input and have a component hooked up to the Y-P
B
P
R
input jacks to
access this COMPONENT SET menu.
3. All settings will affect only the component input you are currently viewing.