Filter
Top Products
18
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 2.
1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown below.
2. Connect the cable from the P
B
OUT of the Laserdisc or the DVD player to the INPUT 2 (P
B
) jack, as shown below.
3. Connect the cable from the P
R
OUT of the Laserdisc or the DVD player to the INPUT 2 (P
R
) jack, as shown below.
4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 2 (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 2 (AUDIO/L) jack.
6. Press the INPUT button until Y-PBPR appears, to view the program from the Laserdisc or DVD player.
The mode Y-PBPR disappears automatically after approximately eight seconds.
7. Press the INPUT button to return to the previous source.
NOTE: Completely insert the cable connection when connecting to rear panel jacks. The picture that is played back will be
abnormal if the connection is loose.
If you have a COMPONENT DVD or LASERDISC, use the COMPONENT connections in place of the standard or
S-Video connection.
Y-P
B
P
R
can receive 480i signal only.
See Page 14 for TIPS ON REAR PANEL CONNECTIONS.
BR
B R
BR
B R
Y P P
BACK OF DVD PLAYER
OUTPUT
L R
BACK OF DVD PLAYER
OUTPUT
L R
Y P P
ANT A
TO CONVERTER
ANT B
AUDIO
(MONO)
L /
R
VIDEO
S-VIDEO
COMPO-
NENT
VIDEO
Y P P
AUDIO
(MONO)
L /
R
VIDEO
L
R
INPUT 1
AUDIO TO HI-FI
INPUT 2
VHF/UHF
AUDIO
(MONO)
L /
R
VIDEO
S-VIDEO
COMPO-
NENT
VIDEO
Y P P
AUDIO
(MONO)
L /
R
VIDEO
L
R
INPUT 1
AUDIO TO HI-FI
INPUT 2
32/36UX01S
32/36GX01B