Hitachi 37LD9600 Flat Panel Television User Manual


 
29
ENGLISH
TV SETUP OPERATION (continued)
Setup Menu (RGB mode) (continued)
Selected Items Setup hint
Input Level
0.7V
Normally, select [0.7V].
Select [1.0V] only when the whole display becomes too
white.
1.0V
Frequency Display
Off
Select whether indicating the PC signal frequency infor-
mation on Input Signal Screen Display or not.
On
WVGA Type
Off
It allows you to switch display size to [Full] and [Real]. (See
“Size Switching” on
55
for the details.)
This function is available only for WVGA signal.
Refer to “Recommended Signal List” on
75
.
On
WXGA Mode
Off
This function is available only for WXGA signal.
Refer to “Recommended Signal List” on
75
.
1280x768
1366x768
Vertical Filter
Off
Reduce the ickers on the screen when set to [On].
On
Frequency Mode
PC
This mode is not available. (It is shown in grey.)
Movie
Information
The items indicated by “
*
” can be automatically stored depending on the signal mode.
The signal mode is identi ed by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost
same values in all the above items might be regarded as the same signal.
The item “Auto Adjust” cannot be stored. Press
OK
button to start auto adjustment as needed.