Hitachi 37LD9600 Flat Panel Television User Manual


 
41
ENGLISH
CONFIGURATION
Change Default System Language
i+
More
System Language
Country
Audio Language
Subtitle
Favourite Mode
Receiver Upgrade
Parental Settings
English
France
English
Off
Off
C-V.1.0
If you want to change the setting after completing the easy preset, set up individually as follow. Refer to
21
about
the easy preset.
Reset to the factory setting.
1. Press
MENU
button on the remote control.
2. Select "Installation" on the DTT main menu.
3. Select "First Time Installation".
4. Select the preferred language by using
button and
press
OK
button. (32/37LD9700C/N only)
5. Select the country where you watch by using button and press
OK
button. (32/37LD9700C/N only)
6. The message appears as shown. Press "Yes".
Searching for New Channels.
1. Press
MENU
button on the remote control.
2. Select "lnstallation" on the DTT main menu.
3. Select "Add New Channels".
4. Choose either "Automatic Search" or "Manual Search". ("Automatic Search" (recommended)
searches through all available broadcast frequencies for free-to-air channels whereas "Manual Search" searches
on a single broadcast frequency.)
Changing Preset
Re-Installing DTT channels
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Your previous digital channel list will be erased.
Are you sure you want to delete all digital channels
and settings for rst time installation?
Yes
No
Changing System Language (OSD) and Country
If you want to change the setting after completing Easy Preset process, press
MENU
button to set up individually.
System Language
You can select your preferred OSD language on DTT mode.
1. Press
MENU
button on the remote control.
2. Select “Con guration” on the DTT main menu.
3. Select “System language.”
4. Select the language by using button and press
OK
button on the remote control.
For 32/37LD9700U/C
English Français Deutsch Italiano Español
(English) (French) (German) (Italian) (Spanish)
For 32/37LD9700N
English Svenska Dansk Suomi
(English) (Swedish) (Danish) (Finnish)
Country (only for 32/37LD9700C/N)
Select the country where you watch TV. It will have an effect on the tuning.
1. Press
MENU
button on the remote control.
2. Select “Con guration” on the DTT main menu.
3. Select “Country”.
4. Select the country by using button on the remote control.
For 32/37LD9700C
France Germany Spain Italy
For 32/37LD9700N
Sweden Denmark Finland
*
The item “Country” appears only for 32/37LD9700C.