Filter
Top Products
29
MENU OPERATION (continued)
Picture Menu (TV/AV mode)
In this menu, you can make specifi c adjustments for the picture based on your preference.
By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.
Selected Items Setup hint
Picture Mode
Dynamic
You can make the better selection from 3 modes
depending on the lighting condition and intended use.
Dynamic: Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
Natural
Cinema
Contrast*
-31 +31
(+32 +40)
This adjusts the contrast to meet the lighting environment
by using ◄►.
The maximum value can be extended to [+40] by
pressing and holding ► button at [+31], which changes
the color between those numbers from green to
magenta. This is the special feature prepared for the
dark scene. At the normal condition, it is recommended
to set the value less than [+31].
Brightness* -31 +31
With this function, black is adjusted to change the overall
brightness by using ◄►.
Color* -31 +31
It can adjust color density based on your preference by
using ◄►.
Sharpness* -15 +15
Preferred sharpness can be adjusted by pressing ◄
button for Softer image or ► button for Sharper image.
Tint* -31 +31
Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
color. This is not available (grayed out) when receiving
PAL/SECAM signal.
Color Temperature*
Cool
You can select from 4 settings (default) depending on the
color condition with ◄► buttons.
Normal
Warm
Black/White
Picture
Picture Mode Dynamic
Contrast +31
Brightness –31
Color 0
Sharpness +15
Tint 0
Color Temperature Normal
Contrast Mode Normal
Reset Reset
Select OK Set Return
Picture Dynamic
YNR Off
CNR Off
Film Mode On
3D Comb Filter Off
LTI Off
CTI Off
Black Enhancement Off
Auto Color Off
Reset Reset
Select OK Set Return
Picture Dynamic
Color Temp. Adjust
Color Management
Color Decoding
Select OK Set Return