Hitachi 42PD8A10 TV Antenna User Manual


 
-21-
If the VCR is connected via Aerial input it
is suggested to use Pr ogramme 0.
Decoder
Cable TV offers you a wide choice of pro-
grams. Most of them are free, others are to
be paid for by the viewer. This means that
you will need to subscribe to the broadcast-
ing organisation whose programmes you
wish to receive. This organisation will supply
you a corresponding decoder unit to allow
the programmes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied w ith your decoder.
Connect a decoder w ith an aerial socket
to the TV
• Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
• Connect the decoder to the TV with a Scart
cable to SCART 1.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a Scart cable to SCA RT sock-
ets.
Playback NTSC
To use this option you can;
• Connect an NTSC VCR player to a Scart
socket at the rear side of the TV.
• Connect an NTSC VCR player to RCA Jacks
at the rear side of the TV.
Then, press the
button to select appro-
priate source.
Copy Facility
Source selection for VCR recording.
• Select Feature menu.
• Select Ext-2 Out by pressing
_
/
`
button.
• S elect a source to copy the picture from that
source.
Search For And Store The Test
Signa l Of The Vide o Recorder
Unplug the aerial cable from the aerial
socket of your video recorder .
• Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
Enter the Install menu and select search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. Store the test sig-
nal under programme nu mber 0.
Replace the aerial cable in the aerial
socke t of your video recorder once you have
stored the test signal.
Camera A nd Camcorder
To Connect To AV Input
Connect your camera or camcorder to AV
(EXT-5) input at the rear side of the TV.
• Connect your equipment to the TV via VIDEO
(yellow) , AUDIO R (red) and A UDIO L (w h ite)
inputs. You must connect the jacks to the in-
put using the same colour.
To Connect To S-VHS I nput
Connect your camera or camcorder S-VHS
input at the rear side of the TV.
• Connect your equipment to the TV via S-VHS
input and audio inputs of AV inputs by using
S-VHS cables.
Connect The Decoder To The
Video Recor der
Some video recorders have a special Scart
socket for decoder.
• Connect a Scart cable to the Scart socket of
your de coder and to the special S cart socket
of your video recorder. Refer to the booklet
of your video recorder.
• To connect your video recorder to the TV, re-
fer to the TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.
Downloaded From TV-Manual.com Manuals