Hitachi 43F300 Projection Television User Manual


 
AUDIO
38
ON-SCREEN DISPLAY
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a
weak stereo broadcast or SAP (second audio program) which may be a secondary language, weather report, etc.
The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example
below for each selection when both stereo and second audio are received (monaural is always received).
Press CURSOR ̆ or ̄ to highlight a function. Press the SELECT button to select the function setting. When the function has a “”in
the box it is ON.
Advanced
Settings
Audio
Move
SEL
Return
Advanced Settings
Audio Source
Stereo Mono 2nd Audio Prog.
Internal Speakers
On Off
Auto Noise Cancel
Perfect Volume
Loudness
Sound Enhancement
Balance
Bass
Treble
Audio
Move
SEL
Select
50%
50%
Advanced Settings
CURSOR
L R
Internal Speakers
On - Select this feature if using only internal speakers.
Off - Select this feature if you prefer to use only speakers from a separate stereo system.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio
for that channel.
Perfect Volume
This function will automatically adjust volume so each channel has the same average volume level.
Loudness
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
Ant A 31
NEWS
10:00 PM
STEREO SELECTED
SAP SELECTED MONO SELECTED
Stereo
ST/SA
Ant A 31
NEWS
10:00 PM
SAP
ST/SA
Ant A 31
NEWS
10:00 PM
Mono
ST/SA
Audio
Selected
Audio
Broadcast