Hitachi 43F300 Projection Television User Manual


 
SETUP
51
ON-SCREEN DISPLAY
Select ANTENNA if you are using an indoor or outdoor antenna. Select Cable if you have cable TV.
Use CURSOR ̇ , ̈ to highlight the correct signal mode.
Press the SELECT button to select highlighted signal.
Press EXIT to quit MENU or select ANT A to return to previous menu.
Reception channels for each mode are shown at the left.
Refer to your cable or TV guide for channel identification standards.
Set The Channels
CURSOR
CURSOR
CURSOR
CURSOR
Set The Channels
Set The Clock
Menu Preference
Setup
Set The Inputs
Move
SEL
Return
Set Event Timer
Set Closed Captions
About Your TV
Magic Focus
Setup
Move
SEL
Return
Set The Channels
Ant A
Ant B
Setup
Move
SEL
Select
Set The Channels
Setup
Move
SEL
Return
Set The Channels
Ant A
Source
Antenna Cable(1) Cable(2)
Auto Channel Scan
Start
Setup
Move
SEL
Select
Set The Channels
Ant A
Source
AntennaCable(1) Cable(2)
Auto Channel Scan
Start
Ant A
Ant B
RECEPTION BAND
CATV 1 OR CATV 2
AIR
VHF 2 ~ 13ch
UHF 14 ~ 69ch
CATV CHANNEL
VHF 2~13
Mid band A~1
A-5 ~ A-1
Super band J~W
Hyper band
W + 1 ~ W + 28
Ultraband
W + 29 ~ W + 84
Indicated on
the screen
2 ~ 13
14 ~ 22
95 ~ 99
23 ~ 36
37 ~ 64
65 ~ 125
NOTE: If certain CATV channel’s
picture are poor or unable to
be viewed in Cable (1) mode,
select Cable (2).