Hitachi 50VS69A Projection Television User Manual


 
57
Lamp Replacement
Lamp Replacement
Lamp Replacement
1. Turn off theTV and unplug the power cord. Wait at least 30 minutes to allow the lamp to cool down before
replacing it.
CAUTION: The lamp is very hot and may cause fire or severe burns. Wait at least 30~45 minutes to allow the
lamp to cool before proceeding with lamp removal.
2. At the rear of the TV, locate the LAMP COMPARTMENT . Using a Phillips type screwdriver loosen the screw
until the LAMP COVER can be removed.
NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in
accordance with applicable environmental laws. For lamp recycling and disposal information, go to
www.lamprecycle.org. For product recycling and disposal information, contact your local government
agency or the Electronic Industries Alliance at www.eiae.org (in the US) or the Electronic Product
Stewardship Canada at www.epsc.ca (in Canada). For more information, call “1-800-HITACHI.”
120V
Turn counterclockwise to loosen the lamp cover screw.
LAMP COVER
LAMP COMPARTMENT
& SCREW
Slide to the left , then pull back
the LAMP COVER.
Hg