Hitachi 50VS69A Projection Television User Manual


 
59
5. Be sure to install the lamp cover by re-engaging the two clips and slide to the right. Then tighten the screw of
the lamp cover before turning the power on, otherwise it may cause unusual colors. If the lamp cover is not
installed and you try to turn ON the TV ,the power will be off and the Lamp Indicator will flash (see page 9).
NOTE: If power is connected before the Lamp Cover is installed, the power will be off and the Lamp Indicator
will flash (see page 9).
6. Plug power cord into AC outlet and turn on the main power switch.
NOTE: This product contains lead and a lamp that contains mercury. Dispose of this product and its lamp in
accordance with applicable environmental laws. For lamp recycling and disposal information, go to
www.lamprecycle.org. For product recycling and disposal information, contact your local government
agency or eRecycle.org (in California), the Electronic Industries Alliance at www.eiae.org (in the US) or
Electronic Product Stewardship Canada atwww.epsc.ca (in Canada).
For more information, call “1-800-Hitachi”.
Lamp Replacement
120V
SCREW
LAMP COVER
Place back in the LAMP COVER
then slide to the right.
Turn clockwise to tighten the lamp cover screw.
Lamp Replacement
Hg