Filter
Top Products
27
THE REMOTE CONTROL
THE REMOTE CONTROL
In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different
types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with
one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote control at the screen of the TV and select the TV by pressing the
̇ or ̈ button of the Source
Access on the remote.
To operate your VCR, point the remote at the remote sensor of the VCR and select PVR by pressing the
̇ or ̈ button of the
Source Access on the remote (see page 45 for instructions on how to program the remote to control your VCR).
To operate your cable box, point the remote at the remote sensor of the cable box and select the CABLE (CBL) by pressing the
̇ or ̈ button of the Source Access on the remote (see page 42 for instructions on how to program the remote to control your
cable box).
To operate your set-top-box or satellite receiver point the remote at the remote sensor of the set-top-box and select the SET-
TOP-BOX (STB) by pressing the
̇ or ̈ button of the Source Access on the remote. If you have a satellite receiver, use this
button to program your satellite receiver (see page 43 for instructions on how to program the remote to control your set-top-box).
To operate your DVD player, point the remote at the remote sensor of the DVD player and select DVD by pressing the ̇ or ̈
button of the Source Access on the remote (see page 44 for instruction on how to program the remote to control your DVD
player).
To operate your PVR (Personal Video Recorder), point the remote at the remote sensor of the PVR and select PVR by pressing
the
̇ or ̈ button of the Source Access on the remote (see page 45 for instruction on how to program the remote to control your
PVR).
To operate additional audio equipment, point the remote at the remote sensor of the component you wish to control and select
AMP by pressing the ̇ or ̈ button of the Source Access on the remote (see page 46 for instructions on how to program the
remote to control additional Audio/Video equipment).
NOTE: When you are in a dark room, press any button on the remote to light up the buttons.
The illumination will light for a few seconds during this time. The current mode indicator
will flash one time. These buttons will not appear to light if the room is too bright.
GUIDE
A/V NET