Hitachi 51F710G Projection Television User Manual


 
Auto Channel Scan
This feature will automatically store active TV channels
in Auto Channel Scan memory.
1. Use the CURSOR buttons
̆ or ̄ to highlight
CABLE or AIR.
2. Press the CURSOR buttons
̇ or ̈ to highlight the
START or RESET option.
3. Press the SELECT button to select.
NOTE: When a CableCARD is installed, Auto
Channel Scan for CABLE will not be
available.
Channel List
This function allows you to review which channels are
labeled (CH ID), which have been added to CHANNEL
MEMORY (SCAN), which are protected by LOCK and
which are your FAVORITE (FAV) CHANNELS.
1. Use the CURSOR buttons navigate the Channel
List.
2. Press the SELECT button to select ON or OFF on
the SCAN and LOCK Columns.
3. To select the LOCK column, input the access
code. (Default access code: 0000)
4. Press the FAV button to set or remove the
FAVORITES settings.
5. Press the EXIT button to return to normal viewing.
NOTE: 1. When a CableCARD is installed, the Channel List will be dependent on channels agreed upon by
you and your cable operator.
2. When changing cable sources from CABLE (1) to CABLE (2), the AUTO CHANNEL SCAN needs to
be repeated for the Channel List to be updated.
Channel List
Auto Channel Scan
Signal Meter
Channel Manager
Move
SEL Return
Channel List
Channel Manager
Move SEL On/Off INFO Detail
INFO
8:01 PM
FAV CH# Scan Lock ID
6 On Off -------
7 On Off -------
8 On Off -------
9 On Off -------
10 On Off -------
11 On Off -------
12 On Off -------
13 On Off -------
Show name
3:00PM-
̈
3:30PM
Channel List
Auto Channel Scan
Signal Meter
Channel Manager
Move
SEL Return
Auto Channel Scan
Channel Manager
Move SEL Return
Cable
Auto Channel Scan Start Reset
Cable Source Cable(1)
Air
Auto Channel Scan Start Reset
OR
39
Channel Manager
On-Screen Display