Hitachi 55EX7K Projection Television User Manual


 
-SOUND- FUNCTIONS - 33 -
To simplify convergence, the following feature allows you to display a test pattern of
horizontal and vertical lines on the screen. Properly converged, the lines appear white,
which is actually a combination of the outputs of the three color tubes. The output of the
green tube is stationary. The outputs of the red and blue tubes can be adjusted. When
properly aligned, the outputs of all three tubes should be directly over each other to
produce the white lines.
Press MENU, 2, ENTER, 3, ENTER to display the CONVERGENCE ADJUSTMENT.
Press the CURSOR , to move the color displayed up or down.
Press the CURSOR , to move the color displayed left or right.
Press ENTER to change the color.
Press MENU to exit.
-SOUND- FUNCTIONS
Press MENU, 3, ENTER to display the -SOUND- functions.
SOUND PROGRAM is for your preferred settings - balance, bass and treble.
SOUND SETTING is used to improve the sound quality.
SOUND PROGRAM
You can have two sets of preferred settings, PREFERENCE-A, PREFERENCE-B or
use the factory PRESET settings.
Press MENU, 3, ENTER, 1, ENTER to select the SOUND PROGRAM.
Press the CURSOR buttons to select and make adjustments.
BALANCE - This function will control the left, right balance of the TV internal speakers,
the AUDIO TO HI-FI output, and the surround speakers.
BASS - This function controls the low frequency audio to all speakers.
TREBLE - This function controls the high frequency to all speakers.