Filter
Top Products
CUSTOMIZE - 44 -
Use CURSOR or to highlight function and CURSOR to set ON or OFF.
When CHANNEL is turned on, the picture and sound for the chosen channel will be
blocked out.
When VIDEO: 1 or 2 is turned on, the picture and sound for the chosen video input
will be blocked out (To lock a Video input, you must be tuned to the input you wish to
lock).
When QUICK LOCK is turned on, the picture and sound for channels 3, 4 and all
Video inputs will be blocked out.
When TV TIME OUT is turned on, you can set the BEGIN and END times and the
TV cannot be viewed during that time period.
To change the key number, select CHANGE SECRET CODE. Enter a new four digit key
number you prefer.
If you forget your key number, use the factory code 7777 to erase your key number.
This will reset the key number back to the factory preset 0000.
NOTE: If ANT A and ANT are in the same SIGNAL SOURCE mode (see page 29), when a
channel is locked, it is locked on both antenna inputs.
When using TV TIME OUT make sure the clock is set (see page 33).
4 EVENT PROG.
This function will automatically turn the TV on and off, one time only, every day or once