Filter
Top Products
SETUP
65
ON-SCREEN DISPLAY
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.
Manual Convergence Adjustment Mode
Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-START to access convergence
crosshatch pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the adjustment point cursor using the THUMBSTICK, the Adjustment Cursor must be WHITE. Another way to move the
Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the
adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the THUMB STICK to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
Press the [0] button on the remote control to CANCEL adjusted data and return to main picture.
Press the [1] button on the remote control to SAVE adjusted data and return to main picture.
Press the [2] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern).
Press the [3] button on the remote control to recall the factory pre-set convergence data.
Press the [9] button on the remote control to read the SAVED adjusted data. If there is no saved data, pressing the [9] button will recall
the factory pre-set data.
MENU
THUMB
STICK
THUMB
STICK
SELECT
Setup
Locks
Ch. Manager
Aspect
Video
Move
SEL
Sel
THUMB
STICK
SELECT
Audio
Magic Focus Tune Up
Setup
Move
SEL
Return
Aligns the Red, Green, and Blue
colors to correct for Magnetic
Influences.
Auto At Turn Off
(After 90 Days)
Manual
Adjustment Mode
If you want to adjust now
THUMB
STICK
THUMB
STICK
SELECT
Start
Adjustment Point
Cursor
Set The Inputs
Set The Clock
Menu Preference
Magic Focus Tune Up
Setup
Move
SEL
Select
Set Black Side Panel
Set Virtual HD
Set The Color System
About Your TV
Set Closed Caption
Set Event Timer
EXIT
117 Manual Adjust
Please Enter Number.
0.Cancel and go to Normal Mode.
1.Done and go to Normal Mode.
2.Back to Adjust Mode
3.Factory Reset and
Back to Adjust Mode.
0-3.Select