Filter
Top Products
35
On-Screen Display
Vertical Position
This function allows you to select when aspect style is either 4:3 EXPANDED/ZOOM1/ZOOM2 or
16:9 ZOOM. Vertical position can be changed with these modes. For example, it will be useful for
centering the picture area at both the top and bottom of the picture with 480i/480P signal. Adjustable
range is -10 (video center is toward bottom of screen) to +10 (video center is toward top of screen).
NOTE: Vertical Position will not be available in 4:3 STANDARD and 16:9 STANDARD MODES.
5. Press MENU to return to main menu or select PICTURE MODE to return to previous menu.
6. Press EXIT to quit menu.
Black Side Panel
The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode.
The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. The TV set will always return to “Set
Black Side Panel - OFF” setting every time the TV is powered “OFF”.
NOTE: To maximize operating life of the TV’s picture tubes when watching 4:3 signal, Black Side Panel is
cancelled at Power OFF. It is recommended to watch 4:3 signal with gray side bar.
Reset Video Settings
This function allows you to Reset the Video Menu
Settings of the present input and return it to the Day
VIDEO mode.
1. Use the CURSOR buttons
̆ or ̄ to highlight the
function to be adjusted.
2. Press the SELECT button to select RESET VIDEO
SETTINGS.
3. Use the CURSOR button
̄ to access other video
settings.
You can customize each of the Video Inputs to your
preference to increase viewing performance and
pleasure, depending upon the video program being
viewed. If RESET is selected, only the selected Input
will reset to the initial conditions as explained above.
If RESET is selected in INPUT 1, only INPUT 1 will
return to factory conditions.
NOTE: 1. If YES is selected, the VIDEO MENU
SETTINGS will be reset to the original
factory settings on all modes during the
next power on/off
2. Channel List, Volume level and Last-CH
selection remains unchanged.
Reset Video Settings
Video
Move
SEL Return
Select “Reset” to return the video menu settings
on this Input to the original factory settings.
Reset
Select “Yes” to fix the Video Menu Settings to the
original factory Settings on all modes after
Power “ON”.
Reset Video Settings
Black Side Panel
Aspect
Auto Movie Mode
Noise Reduction
Contrast Mode
Black Enhancement
Color Temperature
Sharpness
Video
Move
SEL Return
50%
High
Middle
Dynamic
Off
Off
On
OR
No Yes
Video