Hitachi 65XWX20B Projection Television User Manual


 
SETUP
71
This feature will select the source of the Monitor Output.
Set Monitor Out
THUMB
STICK
SELECT
Setup
Move
SEL
Return
Set Monitor Out
Monitor Out
Monitor
TV Tuner Out
Set The Channels
Set The Clock
Menu Preference
Setup
Set The Inputs
Move
SEL
Select
Set Event Timer
Set Closed Captions
About Your TV
Set Monitor Out
Upgrades
THUMB
STICK
SELECT
Setup
Move
SEL
Return
About Your TV
Model:
Dimensions (Inches) (mm)
Height: - / -
Width: - / -
Depth: - / -
Channel Setup
Set The Clock
Menu Preference
Setup
Set The Inputs
Move
SEL
Select
Set Event Timer
Set Closed Captions
About Your TV
The TV model name and dimensions will be displayed on the TV screen. The dimensions of each TV model
are listed on page 75.
About Your TV
Upgrades
THUMB
STICK
SELECT
Setup
Move
SEL
Select
Upgrade
Software Version: Main V00.15
1394 V00.07
MMC Software Upgrade
Please insert MMC card
before upgrading.
Set The Channels
Set The Clock
Menu Preference
Setup
Set The Inputs
Move
SEL
Select
Set Event Timer
Set Closed Captions
About Your TV
Set Monitor Out
Upgrades
Upgrade Now
This function only works in ANT C (Digital Signal). It shows software information and easy upgrade
procedure. This function allows the TV software to be upgraded by using a flash card (MMC Card). If a future
software upgrade is required for your TV, Hitachi will notify and provide you with a flash card. In order to
receive written notification and the flash card, please complete and return the warranty card.
Monitor- Select Monitor to output the audio and video signals of the chosen input source (ANT A, ANT B, VID3-VID5) to a VCR or other
A/V device. It will also send digital audio and video signals from ANT C - DTV and IEEE1394 devices that are not copy
protected.
TV Tuner Out- Select TV Tuner Out to output the audio and video signals of the last watched Antenna Source (ANT A, AN T B, ANT C).
Use THUMB STICK ̆, ̄ to highlight the function to change then press down on THUMB STICK to select the function.
Press EXIT to quit menu or THUMB STICK ̇ to return to previous menu.
Insert MMC card, then press THUMB STICK ̆, ̄ to highlight “Upgrade Now”. Press down on THUMBSTICK to select and start
upgrading.
NOTE: Any power interruption during the upgrade process will cancel the upgrade. When this happens, repeat the upgrade
procedure.